Quote:
Originally Posted by runmofo
Actually power flows from negative to positive. It is hard to explain but you can look it up. Back in the day when they first had electric everyone was taught it flowed from positive to negative. After many year with this theory they never changed it. One of the "ground" wires is a bonding wire. It bonds all the circuits of the house together. You can look that up too if you want to see how it actually works. AC current is complicated and unpredictable.
|
That is incorrect. AC current is not a vector, it's a scalar, therefore it cannot have a direction.
The power factor
PF is mathematically defined as the cosine of the phase angle between voltage and current. True power is defined by the equation
. The graphical representation produces a product of the voltage and current. This product is represented as a sine wave, which is twice the frequency of the voltage and current and represents the instantaneous power and its direction. If the power sine wave is completely on the positive side of the axis, it shows that the power in the system is traveling only in one direction, toward the load. The area under this power sine wave curve represents the amount of energy delivered to the load. If the power sine wave is shifted, the difference in area between the positive and the negative sides represents the power delivered to the load. The negative side of the power sine wave represents the reflected power from a reactive load. A lagging power factor is one in which the current is lagging behind the voltage and is characteristic of an inductive load. A leading power factor is one in which the current is leading the voltage and is characteristic of a capacitive load. If the phase angle were to be shifted to be greater than 90 degrees in either direction, the load would effectively become the source.
Linear Mode
